MİRİZOBANT
Multi-purpose, self-adhesive insulation tape
Mirizobant insulation product is mainly bitumen-based, with Pure Aluminum, Colored Aluminum Foil or Colored Membrane coating on one side and a removable film on the other side, which is a water and sound insulating tape. Mirizobant products are not negatively affected by sunlight thanks to their natural aluminum foil or natural membrane coating. They can be easily applied to inclined and curved surfaces thanks to their elasticity. Mirizobant products offer practical solutions to many details with their waterproof properties and self-adhesive properties. Mirizobant products can be ordered in the width and length you want, as well as in standard 13-15 cm wide and 10 m long rolls.
Mirizobant offers practical solutions to many details with its waterproof properties, aesthetic appearance and self-adhesive properties.
Since Mirizobant has the ability to adhere to many surfaces such as wood, metal, plastic, glass, plaster and concrete, it can be used on cracks that may occur on walls, parapets, chimney bottoms, eaves, cornices, and body walls. roofing, insulation of ship decks, container hulls in transport. in repairs, in the automotive industry, etc. Many details can also be used.
Mirizobant is a practical waterproofing tape that anyone can use for repair and maintenance purposes.
Insulation is now very easy with Mirizobant...
Multi-purpose self-adhesive insulation tape
Ingredients:
Since its top layer is covered with Pure Aluminum, aluminum foil or Membrane, it is not affected by the sun's harmful ultraviolet rays. Since it is self-adhesive, it can be safely applied to non-combustible materials such as metal, wood and plastic. Since its composition is made of SBS (Synthetic Rubber) based bitumen, it maintains its elasticity in every climate zone, does not crack or flake. Since the back cover is a removable PE film, it can be peeled off easily.
Types and sizes:
Mirizobant products consist of a bitumen-bitumen adhesive mixture with 3 types of top surfaces: Pure Aluminum, Aluminum foil and membrane, and are available in 8 colors as desired, 5, 10, 13, 15, 20, 30, 40, 50, 60, 80, 100, 120 cm wide and 10 m long.
Area of use:
Mirizobant products are used in home renovations, in wall, parapet, chimney bottom details, cornice, kanyok (mahiyya), body wall and ridge joints, in cracks that may occur in corrugated sheets, in the insulation of roof coverings, for the insulation of bathrooms and sanitary junctions, in car upholstery, in the joints of prefabricated elements, in the emergency repair of joinery and glass cracks, in container and tank bodies used in transportation, in the insulation of pipe joints, in the repair of water tanks and silos, and in the insulation of boat deck coverings.
Application form:
The surfaces on which Mirizobant products will be applied must be dry and clean. There should be no foreign substances such as dust, silicone, oil, rust on the surface. A BITUMER primer layer (Bitumen Emulsion) should be applied to rough surfaces such as concrete, plaster and board. When attaching the Izobant tape, the PE film on the back surface is removed and air bubbles are removed by pressing with a small roller. This tape, whose adhesion strength increases over time due to its bituminous structure, bonds with the place where it is attached over time.
